HydraX 2.0 Hydrogen Water Bottle

Power Supply: AC100-240V
Power Adapter: DC5V/1A
Battery Capacity: 1500mAH
Standby Current:<10uA
Water Cup Capacity: 450 ml
Charging Time: 2-3 hours
Charging Port Type: USB-C
Cycle Time: 3 minutes
Number of Uses Fully Charged: 25 uses
Liquid Temperature: 1-55℃
Electrolysis: Blue Light
Material: Glass +304 stainless steel
PPB: 1500ppb
Bottom with vent holes

1) Before using the Hydrogen Water Bottle, ensure the bottle has been charged fully. When charging, the light will be red, and once fully charged, the light will be green.

2) Before the first use of the bottle, it is important to run two full cycles and then empty the water out.

3) Fill the bottle with filtered, distilled, mineral or tap water.

4) Press the start button, a blue light will turn on.

5) A beeping sound indicates the device is turned on, and the hydrogen generator will start producing molecular hydrogen into the water.

6) The Hydrogen production will last 3 minutes, after which the device will automatically turn off, and so will the light.

7) Maintenance and how to clean the hydrogen water bottle:

a) Add 300ml of distilled water.
b) Add 100ml of white vinegar.
c) Screw lid on the hydrogen water bottle.
d) Turn on the bottle and let it run for one cycle. You may need to run it for 2-3 cycles to remove all scaling. When the scaling is cleaned, the water and vinegar mixture will produce lots of bubbles.
e) Pour out the vinegar and water mixture.
f) Rinse the hydrogen water bottle.
g) Add 220ml of distilled water in the bottle. Let it run for one cycle.
h) Rinse again. (A few rinses may be required to ensure the bottle is cleaned sufficiently).